Skip to content

PAR-P2TEMPTABLET: 2MP HD Temperature Measurement & Face Recognition Terminal

2MP HD Temperature Measurement & Face Recognition Terminal

Features

  • 8 inch LCD screen
  • High-accuracy IR body temperature measurement
  • Non-contact body temperature measurement
  • Human-sounding voice prompt
  • Real-time face mask detection
  • Face liveness detection technology distinguishing real faces from non-real face spoof attacks
  • Highly accurate face recognition using deep learning algorithm
  • Stand-alone device, ready for networking
  • Supports Native Chrome/EDGE Use

 Please Review and Follow All Current FDA Regulations.

DISCLAIMER: InVid Tech products are not FDA approved medical devices and cannot diagnose Coronavirus infection and are not intended for use in the diagnosis of disease or other conditions or in the cure, mitigation, treatment, or prevention of disease. When configured correctly, the InVid Tech products discussed here can identify individuals showing higher than average skin-surface temperature relative to a sample population. Only a licensed medical professional can determine if a “hot” individual is experiencing an abnormal medical condition. Uses the HiSilicon Chip. 

Performance

PAR-P2TEMPTABLET

OS

Embedded Linux

Storage

8Gb DDR3 +16GB EMMC

Screen


Display Screen

8inch LCD screen; resolution: 1280x800; contrast: 500:1

Brightness

500 lux

Control Interface

I2C

Temperature Measurement


Temperature Measuring Range

89.6°~109.4° F (32°~43°C)

Accuracy

± (.54°F) 0.3°C

Measuring Distance

1Ft (0.3m)

Face Recognition


Sensor

1/2.7

Lens

2MP dual-lens, f=3.97mm @ F1.6

Lens Mount

M12

WDR

120db

Height Range of Face Recognition

3.93-7.21Ft (1.2m-2.2m) (the recommended installation height is 4.75ft/1.45m)

Face Recognition Distance

0.98-6.56Ft (0.3m-2m)

Recognition Mode

Face: 1:N

Recognition Duration

≤ 0.5 s per person

Face Capacity

20,000

Recognition Accuracy

99.70%

Supplementary Light


Fill-in Light

Soft white light, IR light

White Light Distance

3.28-9.84Ft (1-3m)

Smart Linkage


Screen Wakeup

Yes

Light Adjustment

Yes

Snapshot

Yes

Audio


Two-way Talk

Yes (noise reduction and echo cancellation)

Audio Input

1CH built-in MIC

Audio Output

Built-in speaker

Interface


Network Interface

10/100Mbps self-adaptive Ethernet port x1

Alarm Input

2CH

Alarm Output

2 CH

Wiegand Interface

Wiegand input/output(26/34)

RS485

RS485x1 (half duplex)

Door Lock Output

Relay output, NO/NC(optional), delay setting supported

SD Card Interface

1 micro SD card slot, up to 256G

USB Interface

USB x1

Anti-Tamper Interface

1 button

Exit Button

1

Reset Button

1

Others


Power

12VDC@2.5A

Power Management

Screen sleep, screen protection

Power Consumption

<12W

Weight

Approx. 1.2KG

Installation

Wall Mounting,Pole Mounting, Embedded Installation, Desktop

Protection

Surge Protection and Voltage Transient Protection

Certifcate

CE, FCC

Environment Protection

Complies    with    Directive  EU   RoHS, WEEE(2012/19/EU) , directive 94/62/EC and REACH(EC1907/2006)

Working Environment

60°F~95°F,<95% (non-condensing), without wind, indoor only, 7-10 ft from opening doorways to outside or HVAC vents, no direct sunlight on the thermopile sensor or tablet screen

Language Options

English, Espanol, Italiana, French, Deutsche, Nederlands, Hrvati, Magyar, Portuguese, Polski, Norsk & more

Dimensions(mm)

11.88x5.45x1.34 In (301.8x138.6x34.2mm)

PAR-P2TEMPTABLET: 2 Megapixel Terminal

Spec Sheet

Paramont Products Support Page