
Infrared Calibrator for Temperature Accuracy
Features
- Temperature is accurately and stably controlled by import intelligent temperature controller.
- Special high-emissivity coating is used on target surface.
- Rapid heating
Please Review and Follow All Current FDA Regulations.
DISCLAIMER: InVid Tech products are not FDA approved medical devices and cannot diagnose Coronavirus infection and are not intended for use in the diagnosis of disease or other conditions or in the cure, mitigation, treatment, or prevention of disease. When configured correctly, the InVid Tech products discussed here can identify individuals showing higher than average skin-surface temperature relative to a sample population. Only a licensed medical professional can determine if a “hot” individual is experiencing an abnormal medical condition.
Parameters |
Description |
Temperature range |
104°F (Ambient temp. 41°F to 122°F) {40.0°C (Ambient temp.5.0°C to 50.0°C)} |
Target diameter |
2.75in x 2.75in (70x70mm) |
Temperature resolution |
0.18°F (0.1°C) |
Accuracy |
± 0.36°F (at 104°F) {0.2°C (at 40°C)} |
Stability |
± 0.18°F~0.36°F (0.1~0.2°C)/30min |
Emissivity |
0.97±0.02 |
Power |
220VAC 50HZ or 110VAC 60HZ |
Weight |
3.96lbs (1.8KG) |
Size (W x H x D) |
4.33in x 4.72in x 7.08”(110x120x180mm) |
Operating ambient temp |
32°~104°F (0°~40°C) / <80% |
Version 2
General |
|
Temperature Range |
86°F~122°F (30.0℃ ~ 50.0℃) |
Emissive Area |
2.83Inx2.83in (72mm×72mm) |
Temperature Resolution |
0.18°F (0.1°C) . 0.018°F (0.01°C) |
Accuracy |
± 0.36°F (at 104°F) (0.2°C (at 40°C)) |
Stability |
±32.27°F/10min (±0.15℃/10min) |
Emissivity |
0.97±0.02 |
Power supply |
DC24V 3.7amp |
Operating ambient temp |
32°F~104°F /(20~90)%RH (0℃~40℃ /(20~90%RH) |
Dimension |
7.08In(L)×4.33In(W)×4.33In(H) (180mm(L)×110mm(W)×110mm(H)) |
Weight |
About 3.08lbs (About 1.4kg) |
SEC-BBCT: Infrared Calibrator