translation missing: en.general.accessibility.skip_to_content

SEC-BODYTEMPCAM2: Body Temperature Detection Network Camera

Body Temperature Detection Network Camer

Features

  • On-board temp-detection algorithm
  • One IP address two channels
  • Standard Image: 2 Megapixel (1920 x 1080) Resolution
    Thermal Image: Effective pixels 400×300
  • Sensitivity 40mK
  • Thermal: 8mm Fixed lens, Visible: 2.7-12mm motorized lens 
  • Accuracy within 0.54°F  (0.3°C)
  • Body Detection
  • Response Time 30ms
  • 17 color control

Please Review and Follow All Current FDA Regulations.

DISCLAIMER: InVid Tech products are not FDA approved medical devices and cannot diagnose Coronavirus infection and are not intended for use in the diagnosis of disease or other conditions or in the cure, mitigation, treatment, or prevention of disease. When configured correctly, the InVid Tech products discussed here can identify individuals showing higher than average skin-surface temperature relative to a sample population. Only a licensed medical professional can determine if a “hot” individual is experiencing an abnormal medical condition.

InVid Tech Compliant Product-Learn More Here.

            Thermal Camera

            SEC-BODYTEMPCAM2

            Detector Type

            Uncooled IRFPA Microbolometer

            Effective Pixels 

            400(H) ×300(V)

            Pixel Size

            17um

            Thermal Sensitivity (NETD) 

            ≤40mK @F1.0, 300K

            Spectral Range 

            8~14um

            Image Setting 

            Polarity LUT/ DVE/ Mirror/ FCC/ /3D DNR Brightness/Contrast/ ROI

            Color Palettes

            Black-Heat/White-Heat/Rainbow/Iron-Red up to 17 modes

            Thermal Lens


            Lens Type 

            Fixed

            Focus Control

            Manual Focus

            Focal Length 

            8mm

            F No.

            F1.0

            Angle of View

            H: 46°, V: 35°

            Visible Camera


            Image Sensor 

            1/2.8" Sony CMOS

            Effective Resolution 

            1920(H)×1080(V) 

            Shutter Speed 

            1/5 ~ 1/20,000s

            Wide Dynamic Range

            True WDR 120dB

            Min. Illumination

            Color: 0.1Lux @(F1.2, AGC ON)

            B/W: 0.01Lux @(F1.2, AGC ON)

            S/N Ratio 

            More than 55dB

            Focal Length 

            2.7 ~ 12mm 

            Max Aperture 

            F1.6~ F2.9

            Angle of View 

            H: 89° ~ 33°, V: 48° ~ 18°

            Focus Control 

            Motorized

            Video and Audio


            Frame Rate

            Main Stream: 

            Visible: 1920×1080/1280×720 @25/30fps Thermal: D1 @25/30fps 

            Sub Stream:  

            Visible: D1/VGA/640×360/CIF/QVGA @25/30fps Thermal: CIF @25/30fps

            Bit Rate Control

            CBR/VBR

            Bit Rate

            Main Stream:  

            Thermal: 100Kbps~6Mbps, Visible: 100Kbps~12Mbps 

            Sub Stream:  

            Thermal: 10Kbps~1.5Mbps, Visible: 10Kbps~6Mbps

            Region of Interest

            Off / On (8 Zone, Rectangle)

            Digital Zoom 

            16x

            Mirror

            Support

            Defog

            Support

            Motion Detection

            Support

            Privacy Masking

            Off / On (4 Area, Rectangle)

            DVE Image Enhance

            Support

            Audio Compression

            G.711, RAW_PCM 

            Intelligence


            Intelligent Functions 

            Motion detection, Disk alarm, I/O alarm, Temperature alarm

            Temperature Detection


            Temperature Detection

            Body temperature monitoring

            Temperature Alarm

            Over temperature alarm

            Accuracy

            ± 0.54°F ( 0.3 ℃) (Emission rate, distance, ambient temperature, etc.) with blackbody , 

            Environment temperature: 41°F ~ 104°F (5°C ~ 40 °C)

            Detection Distance: 9-16ft (3~5m) (13ft recommended)

            Working Environment: Avoid the interference of wind, sunshine, high temperature and reflective objects, indoor only

            Response Time

            ≤30ms

            Temperature Range

            32°F ~ 140°F  (0 °C ~ 60 °C)

            Network


            Ethernet

            RJ-45 (10/100Base-T)

            Protocols

            IPv4/IPv6 ,HTTP,RTSP/RTP/RTCP, TCP/UDP, DHCP, DNS, PPPOE, SMTP, SIP ,802.1x

            Interoperability

            ONVIF, CGI, SDK

            Max. User Access

            10 Users 

            Edge Storage

            FTP

            Local PC for instant recording

            Web Language

            English, Chinese, Polish, Italian, Portuguese, Spanish. Russian, French, Czech, Hungarian 

            Interface


            Ethernet

            1 Ethernet (10/100 Base-T) RJ-45 Connector

            Audio Interface

            1ch Audio In,1ch Audio Out

            Alarm 

            2ch Alarm In,2ch Alarm Out

            RS485

            Support

            Reset Button

            Support (Built-in)

            General


            Power Supply

            DC12V/POE (IEEE 802.3af)

            Power Consumption

            Max 10W

            Operating Temperature

            -22°F~140°F (-30°C~60°C)

            Storage Conditions

            0~ 90% RH

            Certifications

            CE /FCC

            Ingress Protection

            IP66

            Casing

            Metal

            Dimensions

            8.34” x 7.16” x 5.35” (212×182×136mm)

            Net Weight

            4.63 lb (2.1 kg)

            Mounting Options

            Ceiling or Wall Brackets Optional & SEC-BODYTEMPTRI

            SEC-BODYTEMPCAM2: Body Camera Detection Camer

            Spec Sheet

            Secure Products Support Page