Skip to content
VIS-POE4-2: 4-Port Switch

VIS-POE4-2: 4-Port Switch

by Vision Series
Description

Archived: See Updated Accessories 

4 Port PoE Switch with 2 Up-link Ports

Features 

  • (6) 10/100M adaptive RJ45 port, 4 port with PoE function.
  • Each port supports auto MDI/MDIX and auto negotiation.
  • Store and forwarding, support port isolation.
  • Support two lightning of up-link port.
  • Support IEEE 802.3x Full-Duplex and Back pressure Half-Duplex.
  • Support IEEE802.3af/at standards, can provide 15.4W/30W per port.
  • Automatic detection and recognition PD device which is in accordance with IEEE 802.3af/at and the power supply for the device.
  • Intelligent power management, if the electrical equipment power exceeds the normal power output, the system will cut off power supply of the port, after 1-2 minutes, it will reexamination and power supply.
  • Low power consumption with fan free design, natural heat
                    Specs

                    Product

                    VIS-POE4-2

                    RJ45 Port

                    Port number: 6

                    POE port number: 4

                    Port type: RJ45 adaptive

                    Port rate: 10/100M

                    Cable type: CAT5 or better

                    Protocol Standard

                    IEEE 802.3 i 10 BASE-T;

                    IEEE 802.3 u 100 BASE-TX;

                    IEEE 802.3 x Flow Control;

                    IEEE 802.3 af/at Power over Ethernet

                    Performance Specification

                    Store and forwarding

                    Backplane bandwidth: 1G

                    Transfer mode: Full-Duplex or Half-Duplex adaptive

                    Addressing: 48 bit MAC address

                    Mac Address Table:1K

                    Network delay: 100Mbps to 100Mbps, less than 20ms under 64byte frame

                    LED Indicator

                    Each Port: ACT, LINK indicator

                    Each Device: Power and PoE indicator

                    Port Protection

                    Meet IEC61000-4-2 (ESD)± 15KV(air), ±8KV and can bear energy of 8/20us 24A (12A)

                    PoE

                     

                    PoE

                    Support IEEE802.3af/at (15.4W/30W)

                    PoE Power Supply Parameters

                    Single Port: 15.4W/30W

                    MAX Power: 65W Serials

                    Power Supply Mode

                    Data line 1/2 (+), 3/6 (-); spare line 4/5 (+), 7/8 (-) optional

                    Power Supply Distance

                    Maximum power distance with CAT5 UTP 328 ft.

                    Environment and specifications

                     

                    Authentication

                    CE/LVD

                    Electromagnetic Compatibility

                    Working temperature: 32-131°F (0~55 ℃); storage temperature: -4 - 158°F (-20~70 ℃)

                    Working humidity: 10%~90%, no condensation; storage humidity: 5%~95%, no condensation

                    Power

                    DC 52V/1.5A

                    Size (L * W *H)

                    5 x 4 x 1 inches (118mm*89mm*25mm, 6 ports)

                    * If Extension mode is on, distance up to 800’, but all ports 10m only

                    Ordering

                    VIS-POE4-2: 6-Channel Decoder Card

                    Downloads/Support

                    Spec Sheet

                    Vision Products Support Page