INVID-DDPB2: Enclosure Weatherproof Box with AC and Backup Battery
Description
Enclosure Weatherproof Box with AC and Backup Battery
The Defender Box is a rugged, weatherproof, NEMA-rated enclosure built for fast, flexible remote surveillance deployments. Designed to securely house recorders, routers, switches, power components, and accessories in one compact, portable unit, it simplifies installations while reducing field wiring and setup time. Engineered for tough environments such as construction sites, parking lots, perimeters, and temporary locations, Defender Boxes provide a clean, organized platform for powering and protecting critical security equipment where traditional infrastructure is unavailable or impractical.
Features
- High-capacity PCM-managed power system with integrated circuit breaker for reliable operation in demanding environments
- Built-in 360W Power Control Module (PCM) delivering intelligent power distribution, protection, and load management
- Integrated industrial 8-channel PoE+ switch, enabling direct connection and power for cameras and edge devices
- Built-in backup power system featuring a 24V 40Ah lithium battery with integrated heater for cold-weather reliability
- Active thermal management with dual internal fans automatically controlled by the PCM to maintain optimal operating conditions
- Pre-installed Sound AI PoE light siren, supporting active deterrence and real-time response applications
- Weatherproof AC power entry with IP68-rated stainless steel connector and UL-listed waterproof AC connectors
- Flexible cable entry and accessory support, including 3/4” NPT knockout, PG16 connectors, and clean internal cable routing
- Pre-designed mounting locations for 4G antennas and horn speakers to streamline wireless and deterrence installations
- Multiple mounting options, including pole and wall mounting brackets with support for PTZ camera installation
- Portable, installer-friendly enclosure with integrated hand carrier for faster deployment and relocation
Spec
|
Overview |
INVID-DDPB2 |
|
Product description |
Enclosure weatherproof box with AC and backup battery (integrated PoE switch, battery, deterrence light). |
|
Power control module (PCM) rating |
360W PCM |
|
Primary use case (inferred) |
Higher-power enclosure with integrated 8ch PoE+ and battery backup/UPS signaling for more complex deployments. |
|
AC Input & Power Distribution |
|
|
Power System Type |
Integrated AC-to-DC power system (PCM-based) |
|
AC input |
110–277VAC (max 1.5kW) |
|
AC wiring / connector |
70cm AC wire w/ IP68 waterproof stainless connector; UL-listed male/female |
|
Air breaker (circuit breaker) |
Built-in air breaker |
|
Surge protector |
Integrated surge protection via PCM |
|
USA DIN rail power plug(s) |
N/A (internal power system) |
|
DIN rail installation |
Internal DIN rail mounting for PCM power components |
|
DC Inputs / Outputs |
|
|
DC power inputs |
N/A (AC input only; no external DC inputs) |
|
DC48V output |
DC48V/3A (max 150W) |
|
DC24V output |
Battery charging output DC24V (max 150W) |
|
DC12V output |
DC12V/5A (max 60W) |
|
12V channel count / control |
N/A |
|
External fan power output |
DC12V/1A, 2 ports |
|
External LED power output |
DC12V/1A, 1 port |
|
Important Note |
PCM-managed power distribution with higher AC tolerance |
|
Alarm / I/O / Signaling |
|
|
Alarm inputs |
N/A |
|
Alarm outputs |
N/A |
|
UPS / power-fail signaling |
UPS signal output: AC power supply normally open; battery powered normally closed |
|
Battery / UPS / PoE |
|
|
Backup battery included |
24V/40Ah ternary lithium battery with heater (built-in) While in “Battery Mode” only the DC Outputs, DC12v and DC48V (switch) will be powered. |
|
PoE switch integrated |
Built-in 8CH industrial PoE+ switch; AT 30W per port; 240W total |
|
Deterrence / siren light |
Default: 1pc Sound AI PoE light siren |
|
Thermal / Environmental |
|
|
Weatherproof / NEMA rating |
Weatherproof enclosure |
|
Working temperature range |
-13°F to 140°F (-25°C to 60°C) |
|
Temperature controllers |
Temp controller on PCM |
|
Fans |
2pcs fans (DC12V, controlled by 360W PCM) |
|
Cable entry / knockouts |
NPT 3/4" knockout and cap; PG16 connectors; hand carrier |
|
Mechanical / Mounting |
|
|
Enclosure materials |
Alumium Body+Stainless Bracket |
|
Weight |
Gross: 57.3 lbs (26 kg) with battery; 39.7 lbs (18 kg) without battery |
|
Dimensions (enclosure, W x H x D) |
18.6 x 20.9 x 11.9 in (474 x 530 x 302.5 mm) (including mount) |
|
Mounting |
Wall + pole mount brackets; adjustable pole straps fit 3.5” to 9.8” diameter |
|
PTZ mount included |
PTZ mount included |
|
Hand carrier |
Hand carrier included (stated with knockouts/connectors) |
|
4G antennas / horn speaker install position |
Provided installation position (4G antennas + horn speaker) plus cable-in design |
|
Packaging / Logistics |
|
|
Package box size |
27.2 x 15 x 21.3 in (69 x 38 x 54 cm) |
|
Computed Metrics |
|
|
Enclosure width (in) |
18.60 |
|
Enclosure height (in) |
20.90 |
|
Enclosure depth (in) |
11.90 |
|
Approx enclosure volume (in^3) |
4,626 |
|
Approx enclosure volume (L) |
75.8 |
Ordering
INVID-DDPB2: Enclosure Weatherproof Box