INVID-DDPB2: Enclosure Weatherproof Box with AC and Backup Battery
Description
Enclosure Weatherproof Box with AC and Backup Battery
Features
- Built-in Air Breaker
- Built-in 360W PCM
- Built-in 8CH Industrial PoE+ Switch
- Built-in 2PCs Fans Controlled by 360W PCM
- With 70CM AC Wire with IP68 Water-Proof Stainless Connector,and AC Wire Water-Proof UL
- Male&Female Connector
- With NPT 3/4” Knockout and Cap,with PG16 Connectors and Hand Carrier
- With 4G Antennas and Horn Speaker Installation Position plus Cable-in Design
- With Pole & Wall Mount Bracket and PTZ Mount
- With 24V/40Ah Ternary Lithium Battery Built-in with Heater
- With Sound AI PoE Light Siren 1PCs
Spec
|
Overview |
INVID-DDPB2 |
|
Product description |
Enclosure weatherproof box with AC and backup battery (integrated PoE switch, battery, deterrence light). |
|
Power control module (PCM) rating |
360W PCM |
|
Primary use case (inferred) |
Higher-power enclosure with integrated 8ch PoE+ and battery backup/UPS signaling for more complex deployments. |
|
AC Input & Power Distribution |
|
|
Power System Type |
Integrated AC-to-DC power system (PCM-based) |
|
AC input |
110–277VAC (max 1.5kW) |
|
AC wiring / connector |
70cm AC wire w/ IP68 waterproof stainless connector; UL-listed male/female |
|
Air breaker (circuit breaker) |
Built-in air breaker |
|
Surge protector |
Integrated surge protection via PCM |
|
USA DIN rail power plug(s) |
N/A (internal power system) |
|
DIN rail installation |
Internal DIN rail mounting for PCM power components |
|
DC Inputs / Outputs |
|
|
DC power inputs |
N/A (AC input only; no external DC inputs) |
|
DC48V output |
DC48V/3A (max 150W) |
|
DC24V output |
Battery charging output DC24V (max 150W) |
|
DC12V output |
DC12V/5A (max 60W) |
|
12V channel count / control |
N/A |
|
External fan power output |
DC12V/1A, 2 ports |
|
External LED power output |
DC12V/1A, 1 port |
|
Important Note |
PCM-managed power distribution with higher AC tolerance |
|
Alarm / I/O / Signaling |
|
|
Alarm inputs |
N/A |
|
Alarm outputs |
N/A |
|
UPS / power-fail signaling |
UPS signal output: AC power supply normally open; battery powered normally closed |
|
Battery / UPS / PoE |
|
|
Backup battery included |
24V/40Ah ternary lithium battery with heater (built-in) While in “Battery Mode” only the DC Outputs, DC12v and DC48V (switch) will be powered. |
|
PoE switch integrated |
Built-in 8CH industrial PoE+ switch; AT 30W per port; 240W total |
|
Deterrence / siren light |
Default: 1pc Sound AI PoE light siren |
|
Thermal / Environmental |
|
|
Weatherproof / NEMA rating |
Weatherproof enclosure |
|
Working temperature range |
-13°F to 140°F (-25°C to 60°C) |
|
Temperature controllers |
Temp controller on PCM |
|
Fans |
2pcs fans (DC12V, controlled by 360W PCM) |
|
Cable entry / knockouts |
NPT 3/4" knockout and cap; PG16 connectors; hand carrier |
|
Mechanical / Mounting |
|
|
Enclosure materials |
Alumium Body+Stainless Bracket |
|
Weight |
Gross: 57.3 lbs (26 kg) with battery; 39.7 lbs (18 kg) without battery |
|
Dimensions (enclosure, W x H x D) |
18.6 x 20.9 x 11.9 in (474 x 530 x 302.5 mm) (including mount) |
|
Mounting |
Wall + pole mount brackets; adjustable pole straps fit 3.5” to 9.8” diameter |
|
PTZ mount included |
PTZ mount included |
|
Hand carrier |
Hand carrier included (stated with knockouts/connectors) |
|
4G antennas / horn speaker install position |
Provided installation position (4G antennas + horn speaker) plus cable-in design |
|
Packaging / Logistics |
|
|
Package box size |
27.2 x 15 x 21.3 in (69 x 38 x 54 cm) |
|
Computed Metrics |
|
|
Enclosure width (in) |
18.60 |
|
Enclosure height (in) |
20.90 |
|
Enclosure depth (in) |
11.90 |
|
Approx enclosure volume (in^3) |
4,626 |
|
Approx enclosure volume (L) |
75.8 |
Ordering
INVID-DDPB2: Enclosure Weatherproof Box