INVID-ICON-PRO: Access Control Device
Description
4-Door Controller, with 4 Relays, Poe, and Wi-Fi
Network access controller INVID-ICON-PRO allows you to control access to your building with electromagnetic or electromechanical locks. It automates vehicle access, tracks time and attendance, and more.
The controller provides several connectivity options, including Wi-Fi or Ethernet + Power over Ethernet (PoE), and can support up to two Wiegand readers or four RS-485 enabled readers with Open Supervised Device Protocol (ODSP) support for next-generation secure readers.
With four relay outputs, it can control locks or other devices, has eight inputs to control exit buttons and door open sensors, and provides auxiliary contacts for emergency lockout.
The controller’s open architecture allows it to integrate with cloud or local access control systems. And the device can be quickly integrated into any customer solution using the built-in Message Queuing Telemetry Transport (MQTT) low-code application programming interface (API).
Features
- The device supports dual connectivity: Wi-Fi and Ethernet. The Wi-Fi network can serve as a backup channel, if required.
- The built-in web interface offers a straightforward and user-friendly experience for setting up the device.
- The device is capable of operating on a wide voltage range of 12-24 VDC and can also be powered through POE (Power over Ethernet).
- We understand the importance of flexibility and versatility of the device and provide an open MQTT API protocol.
- The device’s components have been extensively tested, and the relays have undergone thorough testing for more than 5 million cycles.
- The device’s support for a wide range of protocols provides the possibility of working with a diverse range of third-party equipment.
Spec
|
Parameter |
Data |
|
Voltage |
12 or 24 VDC operation The power supply determines the voltage at the outputs. 0.15A @12 VDC, 0.075A @ 24 VDC current consumption POE 802.3af (15.4W) Total output current when powered by POE 0.6 A @ 11.5 VDC ATTENTION: The Readers power is pass-through. If the device is powered with 24V, the readers will receive the same power. |
|
Outputs |
Four (4) dry form “C” 1.5A rated relay outputs. |
|
Inputs |
Nine (9) inputs (dry contact type) from 0 to 5 volts |
|
Communication interfaces |
• Wi-Fi 802.11 b/g/n 2.4 GHz • Power over Ethernet (10/100 Mbit) IEEE802.3/802.3af • Wiegand 4, 8, 26, 32, 33, 34, 35, 36, 37, 40, 42, 48, 56 bit • OSDP via RS-485 • USB ports (Type-C) for firmware update |
|
Dimensions (D x H) |
5.9″ x 3.15″ x 1.38″ (150 x 80 x 35 mm) |
|
Mounting method |
Wall mount/Din rail mount (option) |
|
Weight |
6.75 oz (191 g) |
|
Operation temperature |
Operation: -40°F ~ 149°F (-40°C ~ 65°C) Storage: -22°F ~ 158°F (-30°C ~ 70°C) |
|
Relative humidity |
5-85 % RH without condensation |
|
Ingress protection rating |
IP 20 |
Ordering
INVID-ICON-PRO: Access Control Device