INVID-P2P-2.4-1.5X2: Wireless Bridge
Description
5km Wireless Bridge
Wireless Bridge:
INVID-P2P-2.4-1.5X2 set adopts professional hardware configuration and wireless transmission rate up to 300Mbps, which is widely used in large space places.
Features
- 1000Mbps bandwidth and 5 km transmission Wireless digital bridge
- WAN:1*10/100/1000 Mbps Adaptive network interface
- LAN:1*10/100Mbps Adaptive network interface
- Supports input PoE 24V or DC 12V1A
- Power supply distance of 50-70 m (related to cable material)
- Outdoor ip65 windproof, rain
- Displays the channel pairing number
- LAN 2 now supports PoE Power for bridge (Not IPC)
The current model supports Mode A PoE input, using pins 1/2 and 3/6 for standard IEEE PoE power. If your switch uses Mode B (pins 4/5 and 7/8), commonly associated with passive PoE, the P2P Wireless Bridge will not receive power. Please verify the specifications of your switch if you are not using an InVid model. We will also note this in our product specifications.
NDAA Compliant Product-Learn More Here.
Specs
|
Product Parameter |
|
|
Main chip |
MTK7620A+7621E+IP1001M |
|
Dominant frequency |
580MHz MIPS® 24KEc™ CPU |
|
Wireless technology |
5G:900M 802.11a/n/ac MIMO technology |
|
Memory |
64MByte DDR2 |
|
Flash |
8MB |
|
Network interface |
WAN:1*10/100/1000 Mbps Adaptive network interface LAN:1*10/100Mbps Adaptive network interface |
|
Button |
1*Digital Switch / reset button, Short press on the digital tube display value to add one, Press it long for 5 seconds to restore the factory settings. Master and slave mode; the main end is the transmitting point, and the slave end is the receiving point |
|
Guiding lights |
Signal sig indicator, ETH network interface status indicator, power indicator, system indicator, digital tube indicator |
|
Power |
24V 1A POE power supply DC 12V 1A, capacity factor﹤10W, LAN Supports PoE, IEEE 802.3 AF |
|
Work environment |
Temperature -22°F ~ 131°F (-30°C ~ 55°C) (work); -40°F ~ 158°F (-40°C ~ 70°C) (storage) Temperature (Non-condensation): 10% to 90% (work), 5% to 95% (storage) |
|
Product size |
9.6 x 3.7 x 2.8 in (245mm*93mm*70mm) |
|
Product weight |
.66 lb (0.3kg) |
|
Antenna |
14dBi directional plate antenna (Horizontal wave half Angle 60°, Vertical wave half Angle 15°) |
|
RF Characteristics |
|
|
Frequency range |
ISM wave range: 4.900GHz ~ 5.850GHz |
|
Channel distribution |
5G, 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161 |
|
Modulation mode |
OFDM = BPSK, QPSK,16-QAM,64-QAM,256-QAM; DSSS = DBPSK, DQPSK, CCK |
|
Wireless power |
11a @54M:20±2dB, @6M:23±2Db 11n 20MHz: @MCS7:20±2dB, @MCS0:23±2dB 11n 40MHz: @MCS7:20±2dB, @MCS0:23±2dB 11ac 40MHz: @MCS7:20±2dB, @MCS0:23±2dB 11ac 80MHz: @MCS7:20±2dB, @MCS0:23±2Db |
|
Receive sensitivity |
11a: @-65dbm@54Mbps, @-81dbm@6Mbps 11n 20MHz: @-64dbm@MCS7, @-82dbm@MCS0 11ac 40MHz: @-61dbm@MCS7, @-79dbm@MCS0 11ac 80MHz: @-58dBm@MCS7, @-76dBm@MCS0 |
|
EVM |
802.11n: ≤-28 dB; 802.11a: ≤ -25 dB |
|
Frequency deviation |
< ±20ppm |
|
Software Features |
|
|
Working modes |
Main ap (bridge access point), from ap (bridge client), by dialing switch |
|
Main network mode |
point to point, point to-point (within 8 points) |
|
Management mode |
WEB tele management |
|
Network settings |
Static IP / dynamic acquisition |
|
Wireless management |
Bridge configuration / Advanced configuration / WIFI Settings / SSID Settings |
|
System |
Time zone Time configuration, login password change, backup/restoration, restart, or scheduled restart |
|
System update |
Update locally and online based on WEB browser |
Ordering
INVID-P2P-2.4-1.5X2: Wireless Bridge