INVID-ISSS180W8POE: 180W Solar Power System
Description
The INVID-ISSS180W8POE is a self-contained solar power system delivering reliable, weatherproof energy to surveillance equipment in any location — no grid connection required. (Supports 180W can expand to 360W)
Features
Solar Power System
- Single 180W monocrystalline solar panels (Dual for 360W total) with adjustable tilt angles — 15°, 25°, 35°, or manual — to optimize sun exposure at any site
Battery System
- Single LFP (lithium iron phosphate) batteries — 1.28 kWh total capacity for superior safety, thermal stability, and long cycle life
- 2,000+ charge cycles at 100% depth of discharge
- IP67-rated battery enclosure — fully weatherproof
Smart Power Management
- Built-in 20A MPPT charge controller at 96–98% efficiency
- BMS with RS-485 port for remote monitoring — check battery health without site visits
- Intelligent heater control for cold-weather operation — discharges down to -4°F (-20°C)
Battery Overlay Display box will work with Paramont and Vision IPCs Only
Distribution Box / Integration
- Outputs DC 12V / 24V / 48V — compatible with a wide range of cameras, PTZs, and IP speakers
- Alarm input triggers built-in strobe light — supports active deterrence configurations
Spec
|
Model |
INVID-ISSS180W8POE |
|
Solar Panel |
|
|
Solar Panel |
Mono-crystalline silicon |
|
Rate Power |
180W x 1 |
|
Open Circuit Voltage (VOC) |
DC 40.8V |
|
Efficiency |
18.4% |
|
Angle |
15º, 25º, 35º, Manual Adjustment |
|
Dimension |
50.8 x 30 x 1.2 in /each (1290*760*30mm/each) |
|
Battery System |
|
|
Battery Type |
LFP (Lithium Iron Phosphate) |
|
Capacity |
DC 25.6V, 50Ah × 1pc — 1.28 kWh |
|
Power Output |
DC 24V, 10A |
|
Estimated Daily Generation LA/NY* |
780W with sunlight, 100W without sunlight/ 570W with sunlight, 73W without sunlight |
|
Estimated Continuous Work w/o Sunlight LA/NY* |
9.2/7.7 days (at 10W device consumption) |
|
Estimated Full Charge Time under Load LA/NY* |
2.4/4 days (at 10W device consumption) |
|
BMS |
Yes, Support RS485 for Remote Monitoring. Or RJ45 port as optional |
|
Built-in MPPT |
20A, Efficiency 96-98% |
|
Low-Temperature Heater |
Yes |
|
IP Rating |
IP67 |
|
Cycle Life |
2,000 cycles at 100% DOD, 25°C |
|
Charging Temperature |
32°F – 131°F (0°C – 55°C) |
|
Discharging Temperature |
-4°F ~ 131°F (-20°C ~ 55°C) |
|
Mounting Bracket |
Pole, Wall |
|
Dimension |
15.7 x 31.5 x 11.8 in /each (400*800*300mm/each) |
|
Enclosure Box |
|
|
Power Input |
Solar Battery |
|
Power Output |
DC12V/24V/48V |
|
Alarm Input |
Yes, to trigger the strobe light |
|
Mounting Plate |
Top, Bottom, Left & Right side (for IPC, PTZ, IP Speaker) |
|
Built-in Strobe Light |
Front Top, Left & Right side Top |
|
Mounting Bracket |
Pole, Wall |
|
Dimension |
21.5 x 16.1 x 9.1 in (545*410*230mm) |
|
Included Accessories |
|
|
POE Switch |
Max 240W. Port 1: HiPoE 60W; Ports 2-8: PoE+ 30W |
Ordering
INVID-ISSS180W8POE: 180W Solar Power System